WTD-Ford Transit 3″ 2WD Lift Kit “Mojave”
$2,570.00
Take your Ford Transit to the next level with the all-new WTD “Mojave” 3″ Suspension Lift Kit—designed for maximum performance, durability, and ground clearance. Unlike other lift kits, the Mojave provides a true 3-inch suspension lift without altering ball joint angles, preloading coil springs, or dropping the subframe. This means you get better off-road capability, improved stance, and the ability to fit larger tires—all without compromising ride quality or reliability.
Why Choose the WTD “Mojave” 3” Suspension Kit?
- True 3” Lift Without Compromise – No stress on ball joints, no coil spring compression, and no subframe drop.
- Maximum Ground Clearance – Unlike traditional lift methods, this kit preserves underbody clearance for better off-road performance.
- Bigger Tire Capability – Fit up to 265/70/17 tires for improved traction and a more aggressive look (trimming required for proper fitment).
- Durable Powder-Coated Finish – Built to withstand harsh conditions and long-term use.
- Compatible with Other Lift Components – Works seamlessly with additional lift modifications for those looking to go even higher.
Technical Notes
- Lower Ball Joint Replacement Required – This kit requires new lower ball joints. Choose from factory or adjustable ball joints, which WTD can install before shipping.
- Trimming Required – Lower front bumper, pinch weld, and door-side plastic must be modified for proper tire fitment.
- Wheel Spacers Recommended – A 3/16-inch thick spacer on the front axle can prevent subframe rub at full steering lock.
Important Fitment Information
***This spindle is NOT compatible with 6-lug Ford Transit models.***
Key Features
- 3 inches of true suspension lift for improved ground clearance and off-road capability
- Increased clearance for larger tires without compromising ride quality
- No change to suspension geometry, preventing premature wear on components
- Powder-coated finish for corrosion resistance and durability
- Compatible with other lift components for additional customization
- Designed and manufactured in the USA
For adventurers, overlanders, and van lifers looking for a reliable, high-performance lift kit, the WTD – “Mojave” 3″ Suspension Lift Kit is the best way to elevate your Ford Transit.
WHAT’S INCLUDED
3″ LIFT SPINDLE – QTY 2
2″ LIFT BLOCKS – QTY 2
U-BOLTS – QTY 2
FOX 2.0 SHOCKS – QTY 2
DESCRIPTION
Take your Ford Transit higher with the WTD Mojave 3″ Suspension Lift Kit. Built for vanlifers and overlanders who want real clearance without wrecking factory geometry, the Mojave gives you a true 3″ lift—no preload, no subframe drop, no ball joint stress. Just better stance, bigger tires, and more capability where it counts.
Why the Mojave 3″ Kit?
-
True 3″ Lift – No coil compression, no alignment headaches, no subframe compromises.
-
Max Ground Clearance – Keeps the underbody clean so you can clear ruts and rocks.
-
Bigger Tire Fitment – Run up to 265/70/17s for more traction and an aggressive look (trimming required).
-
Durable Finish – Powder-coated for long-term use in tough conditions.
-
Upgrade Friendly – Plays well with other lift mods if you’re planning to stack upgrades.
Technical Notes
-
Ball Joints Required – Lower ball joints must be replaced. WTD can pre-install factory or adjustable joints before shipping.
-
Trimming Needed – Front bumper, pinch weld, and door-side plastics need minor mods for tire clearance.
-
Wheel Spacers – 3/16″ spacers on the front axle recommended to prevent rub at full lock.
-
Fitment Note – Not compatible with 6-lug Ford Transit models.
Key Features
-
3″ of real suspension lift without altering geometry.
-
Clears larger tires for better traction and stance.
-
Keeps ride quality intact—no added wear on components.
-
Corrosion-resistant powder coat for durability.
-
Made in the USA, designed for real use.
If you want your Transit ready for rough trails, dirt roads, or just a stronger presence on pavement, the Mojave 3″ Suspension Lift Kit is the no-compromise way to elevate your van.
TECH SPECS
| LIFT | WHEEL TRAVEL | WHEEL SIZE | LUG PATTERN | BACKSPACING | OFFSET | BORE | TIRE SIZE |
|---|---|---|---|---|---|---|---|
| 3" FRONT | 1.5" REAR | 0’’ FRONT | 0’’ REAR | 17x7.5 | 5x160 | 6.20 | +50 | 65.00 | 265/70R/17 |
This kit does require you to change your lower ball joints with the new spindle. For this you can choose to have WTD install factory ball joints or adjustable ball joints. If you would like your ball joints installed with your kit they will need to be added to your cart.
VEHICLE APPLICATION
| YEAR | MAKE | MODEL |
|---|---|---|
| 2015-CURRENT | FORD | TRANSIT 2WD 150 | 250 | 350 (SRW/DRW) |